When it comes to the equipment used in the charcoal briquette production line, a carbonization furnace is required for the production of mechanism charcoal. If you invest in a high-quality carbonization furnace, you will be able to produce high-quality machine-produced charcoal. It goes without saying that if the incorrect carbonization furnace is used, the charcoal produced will be less than ideal. As a result, when purchasing carbonization furnaces, you must exercise caution and pay attention to the brand name. Our company, Fusmar, specialized in the production of high-quality charcoal briquette machines.
In a charcoal kiln, there is a carbonization furnace.
The continuous carbonization furnace for sale kiln is also a procedure that is used in the equipment that is used in the charcoal briquette production line. Every link in the chain, from stick production to carbonization, is critical. As a result, it is used to make the machine-made charcoal that is so important in today's society. The kiln's construction costs are relatively low, and its range of applications is still very broad, allowing users to improve their carbonization skills.
How to make the carbonization equipment kiln more resistant to damage
The primary function of the charcoal kiln is to maintain heat. Any shape or appearance can be used as long as it is capable of achieving the desired result. It is a method of rapid heating and carbonization through external heating in which a flame or hot air is introduced to the bottom of the kiln body at a level equal to or lower than the ground and discharged above the kiln's surface. Regular charcoal kilns, which use updraft ventilation, are composed of three basic components: the combustion chamber, the hot air duct, and the firewood stacking area. The hot air generated by the combustion is introduced into the charcoal kiln through the combustion chamber, which is made by burning coal, firewood, and other fuels in addition to charcoal. There are several devices that control the temperature in the kiln, the most important of which are two air inlets on the hot air duct and the top of the kiln body. The temperature in the kiln is primarily controlled by these two devices. The temperature in the charcoal kiln can be controlled by the air port, which does so by controlling the air inlet channel and the exhaust gas outlet. The charcoal that needs to be carbonized is located in the middle of the stack, between the combustion chamber and the air outlet, in the middle of the stack. Even though the characteristics of the up-flow type charcoal kiln are energy saving, that is, fuel saving, the production efficiency is higher when compared to the down-flow type charcoal kiln; however, the disadvantages are also obvious. a round arch type down-suction charcoal kiln, which may or may not be the most common type of charcoal kiln, is used in the kilnIt goes without saying that a circular arch structure can be used in both the top suction and the down suction charcoal kiln. Nevertheless, from the standpoint of construction mechanics, it is preferable to construct the kiln body first and then surround it, because the top of the arch exerts pressure on the load-bearing wall surrounding the kiln body when the arch is in place. Thermal insulation should be applied in the form of soil or sand, with hoop bricks applied on the outside. In addition to increasing the strength of the kiln body, it can also increase the temperature of the kiln body, which is beneficial for extending the life of the charcoal kiln....